We are dedicated to provide quality products and services, which meet or exceed our customers expectations through continuous improvement.
Equality maintains a Quality Control Dept., with one inspector per shift. The Quality Dept. performes inspectin and testing of products according to inspection criteria and documents these results.
Incoming Inspection: Tooling, raw materials, outside service parts, returned nonconforming parts and products meeting inspection criteria are inspected and documented upon receiving.
In-Process Inspection: Operations are checked by QC upon setup, tooling repair and every shift change there after and the results are recorded. The QC Dept. makes hourly rounds on the shop floor to check all parts visually and measurements are taken if required.
Final Inspection: Parts will be sampled according to the final inspection criteria and inspected per corresponding quality standards, and documented as such.
Pre-Production Inspection/Sampling: Parts will be sampled per specifications and a Pre-Production layout is performed. Samples are sent to the customer per specifications, under the direction of the QC Manager. Parts will not be produced until acceptance is given by the customer.